Cat® C18 Industrial Power Unit (<560 KW) 630Hp TIER3
Key Specs
Maximum Power: 630 hp
Emissions: China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent or Non-Certified
Rated Speed: 1800-2100
PLEASE NOTE: THESE ARE FACTORY NEW (NOT REMAN) UNITS.
Overview
The Cat C18 Industrial Power Unit is offered in ratings ranging from 429-470 kW (575-630 hp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent or Non-certified emission standards. Conveniently pre-configured for a wide range of applications, the Cat Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel-efficient units are ready made for irrigation, industrial, mining and other pump applications.
SEE PRODUCT SPECIFICATIONS LOWER LEFT OF PAGE
TECHNICAL SPECIFICATIONS
Power Rating
Maximum Power 630hp
Rated Speed 1800-2100
Minimum Power 575hp
Emission Standards
Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent or Non-Certified
General
Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
Bore 5.7in
Stroke 7.2in
Displacement 1104.5in³
Compression Ratio 16.3:1
Aspiration Turbocharged Aftercooled (TA)
Rotation from Flywheel End Counterclockwise
Aftertreatment -
Power Unit Dimensions
Length 54.6in
Width 36.3in
Height 48.9in
Weight 4844lb
Standard Equipment
Air Inlet System
- Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
- Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
- Air-to-Air Aftercooled
Charging System
- Charging alternator 24 volt, 50 amp
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request