Cat® C18 Industrial Power Unit (>560 KW) 800Hp TIER 2
Key Specs
Maximum Power: 800 hp
Emissions: China Stage III, U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or Non-Certified
Rated Speed: 1800-2100
PLEASE NOTE: THESE ARE FACTORY NEW (NOT REMAN) UNITS. WHEN THESE ARE GONE THERE WILL ONLY BE TIER 3, T4F.
Overview
The Cat C18 Industrial Power Unit is offered in ratings ranging from 563-597 kW (755-800 hp) @ 1800 rpm. These ratings meet China Stage III, U.S. EPA Tier 2 equivalent and EU Stage IIIA equivalent or Non-certified emission standards. Conveniently pre-configured for a wide range of applications, the Cat Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SEE PRODUCT SPECIFICATIONS LOWER LEFT OF PAGE
TECHNICAL SPECIFICATIONS
PRODUCT SPECIFICATIONS FOR C18 (>560 KW)
POWER RATING: Maximum Power 800 hp
Rated Speed: 1800-2100
Minimum Power 755 hp
EMISSION STANDARDS: Emissions China Stage III, U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or Non-Certified
GENERAL
Engine Configuration: Inline 6, 4-Stroke-Cycle Diesel Bore 5.7 in
Stroke 7.2 in
Displacement 1104.5 in³
Compression Ratio 16.3:1
Aspiration Turbocharged Aftercooled (TA)
Rotation from Flywheel End Counterclockwise Aftertreatment -
POWER UNIT DIMENSIONS
Length 54.6 in
Width 36.3 in
Height 48.9 in
Weight 4844 lb
C18 (>560 KW) STANDARD EQUIPMENT
AIR INLET SYSTEM
Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp
Air-to-Air Aftercooled
CHARGING SYSTEM
Charging alternator 24 volt, 50 amp
CONTROL SYSTEM
Electronic governing, PTO speed control
Programmable ratings
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine limit
Electronic diagnostics and fault logging
Engine monitoring system SAE J1939 broadcast and control
ADEM™ A4 Electronic Control Unit (ECU)
COOLING SYSTEM
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
EXHAUST SYSTEM
Exhaust manifold, dry
Optional exhaust outlet
FLYWHEELS AND FLYWHEEL HOUSING
SAE No. 1 flywheel housing
FUEL SYSTEM
MEUI injection
Fuel filter, secondary (2 micron)
ACERT™ Technology
Fuel transfer pump
Fuel priming pump
LUBE SYSTEM
Crankcase breather
Oil cooler
Oil filler
Lube oil filter
Front sump oil pan
Oil dipstick
Gear driven oil pump
GENERAL
Vibration damper
Lifting eyes
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request