DQKAN Cummins 2500kw 60Hz 13.8kv Diesel Tier 2 Industrial Generator
DQKAN Cummins 2500kw 60 Hz 13.8kv Diesel Tier 2 Industrial Generator Set with QSK60 Series Engine.
WE HAVE 19 NEW UNITS STARTING DEC 2026 FACTORY THESE ARE GOING TO DISAPPEAR. POWER GRID UNITS Made in USA
They are Open Skid units. I can have Enclosures Built and Tanks. I have (19) brand new Cummins 2500kW diesel generator sets available, shipping November and December 2026. If you have data center, utility, or large standby projects stuck behind factory lead times, these can get your customer power in weeks instead of the next available production slot.
EQUIPMENT DETAILS
Model: Cummins DQKAN Engine: Cummins QSK60-G19 NR2, V16, 60L, 3640 BHPRating: 2500kW / 3125kVA Emergency Standby, 2250kW Data Center Continuous (DCC)Frequency/Speed: 60Hz, 1800 RPM
Voltage: 13,800V (7970/13800), 3 phase, wye Alternator: Cummins S9H1D-F4, 105C rise, PMG excitation, Class H insulation Controls: Power Command 3.3 with AUX101 I/O module, paralleling capable Cooling: Set-mounted high ambient radiator (43C / 110F)Emissions: EPA Tier 2, Stationary Emergency Configuration: Open skid, MV/HV entrance box, anti-condensation heaters, duplex fuel filters
Not included: Fuel tank, main breaker, batteries
Dimensions: 276" L x 107" W x 128" H (approx.)
Weight: approx. 49,400 lbs wet
Warranty: New factory Cummins warranty, 24 months / 1,000 hours standby
Description:
Cummins® commercial generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary Standby and Prime Power applications.
Features:
Cummins Heavy-Duty Engine - Rugged 4 cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes. Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability. Permanent Magnet Generator (PMG) - Offers enhanced motor starting and fault clearing short circuit capability. Model DQKAN 60 Hz kW (kVA) Control System - The Power Command® digital control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, Amp Sentry™ protective relay, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance. Cooling System - Standard and enhanced integral set-mounted radiator systems, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat. NFPA - The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems. Warranty and Service - Backed by a comprehensive warranty and worldwide distributor network. ISO8528-5 G3 Capable – Refer to factory for site and configuration specific transient performance classification.