top of page
VIRNIG v70 Open Front Rotary Brush Cutter - Comes with 72", 78" and 84" models

VIRNIG v70 Open Front Rotary Brush Cutter - Comes with 72", 78" and 84" models

$0.00Price
The v70 Open Front Rotary Brush Cutter is Capable of cutting up to 8″ trees, this high performance brush cutter provides faster blade tip speed, quick spin up, and rapid recovery.
  • BENT-AXIS PISTON MOTOR WITH RELIEF VALVES ENSURES RAPID FLYWHEEL SPIN UP & RECOVERY, REACHING FULL SPEED IN 13 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 4 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
  • REPLACEABLE AR400 FRONT SKID SHOES & BOLT-ON AR400 BOTTOM DECK RUNNERS
  • SPINDLE LOW PRESSURE OIL VENT SAFEGUARDS BEARING ADAPTER SEALS IF MOTOR SEALS FAIL
  • CASE DRAIN CONNECTION INDICATOR PROVIDES VISUAL CONFIRMATION OF FUNCTIONING CASE DRAIN
DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.
NO HYDRAULIC BRAKING – FLYWHEEL MAY TAKE MINUTES TO COME TO A COMPLETE STOP.
Quantity

  • TECHNICAL SPECIFICATIONS

    MODEL PRC72 PRC78 PRC84
    Cut Width (Inches) 72.0 78.0 84.0
    Overall Width (Inches) 78.0 84.0 90.0
    Overall Height (Inches) 20.1
    Overall Depth (Inches) 80.3 86.3 92.3
    Deck Height (Inches) 8.3
    Push Bar Height (Inches) 23.4
    Cut Height (Inches) 2.3
    Cutting Capacity, Diameter (Inches) 8.0
    Number of Teeth (Optional) 20 24 28
    Deck Thickness: Top / Side (Inches) 0.25¹
    Recommended Flow Rate (GPM) 30-50 High Flow Only
    Max Operating Pressure (PSI) 4500
    Approximate Weight (Pounds) 2155 2315 2490
    Recommended Loader Capacity Greater than 2200 pounds

    ¹Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).

    BLADE TIP SPEEDS (FPM)

    High Flow (30-39 GPM) Models

    MODEL 30 GPM Minimum 39 GPM Maximum
    PRC72-HF39 13,465 17,505
    PRC78-HF39 14,580 18,955
    PRC84-HF39 15,695 20,405

    High Flow (39-50 GPM) Models

    MODEL 39 GPM Minimum 50 GPM Maximum
    PRC72-HF50 15,530 19,910
    PRC78-HF50 16,820 21,560
    PRC84-HF50 18,105 23,210

    Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM).

bottom of page